1050 aluminum sheet belong to pure aluminum sheet series, and the aluminum content must reach 99.5% or more to be a qualified product. Because it does not contain other technical elements, the production process is relatively simple and the price is relatively cheap. It is the most commonly used series in conventional industries. Industrial pure aluminum has the characteristics of high plasticity, corrosion resistance, good electrical and thermal conductivity, but low strength. It is not strengthened by heat treatment and has poor machinability. It can accept contact welding and gas welding.
| Quantity: | |
|---|---|
Specifications of 1050 Aluminium Sheet
Thickness: 0.1mm - 6mm
Width: 30 mm - 2600 mm
Length: As customer required
Temper: O/H12/H14/H16/H18/H26
Elements | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Others | Al |
Content (max) | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | - | 0.05 | 0.03 | 0.15 | 99.5 |
Alloy | Specified | Tensile | Yield | Elongation |
Thickness(mm) | (MPa) | (MPa) | (%) | |
1050-O/ 1050-H111 | 0.2-0.5 | 65-95 | Min20 | Min20 |
0.5-1.5 | Min22 | |||
1.5-3.0 | Min26 | |||
3.0-6.0 | Min29 | |||
6.0-12.5 | Min35 | |||
12.5-80.0 | ||||
1050-H112 | 6.0-12.5 | Min75 | Min30 | Min20 |
12.5-80.0 | Min70 | Min25 | ||
1050-H12 | 0.2-0.5 | 85-125 | Min65 | Min2 |
0.5-1.5 | Min4 | |||
1.5-3.0 | Min5 | |||
3.0-6.0 | Min7 | |||
6.0-12.5 | Min9 | |||
12.5-40.0 | ||||
1050-H14 | 0.2-1.5 | 105-145 | Min85 | Min2 |
1.5-3.0 | Min4 | |||
3.0-6.0 | Min5 | |||
6.0-12.5 | Min6 | |||
12.5-25 | ||||
1050-H16 | 0.2-0.5 | 120-160 | Min100 | Min1 |
0.5-1.5 | Min2 | |||
1.5-4.0 | Min3 | |||
1050-H18 | 0.2-0.5 | Min135 | Min120 | Min1 |
0.5-1.5 | Min140 | Min2 | ||
1.5-3.0 | Min2 | |||
1050-H19 | 0.2-0.5 | Min155 | Min140 | Min1 |
0.5-1.5 | Min150 | Min130 | ||
1.5-3.0 | ||||
1050-H22 | 0.2-0.5 | 85-125 | Min55 | Min4 |
0.5-1.5 | Min5 | |||
1.5-3.0 | Min6 | |||
3.0-6.0 | Min11 | |||
6.0-12.5 | Min12 | |||
1050-H24 | 0.2-0.5 | 105-145 | Min75 | Min3 |
0.5-1.5 | Min4 | |||
1.5-3.0 | Min5 | |||
3.0-6.0 | Min8 | |||
6.0-12.5 | ||||
1050-H26 | 0.2-0.5 | 120-160 | Min90 | Min2 |
0.5-1.5 | Min3 | |||
1.5-4.0 | Min4 | |||
1050-H28 | 0.2-0.5 | Min140 | Min110 | Min2 |
0.5-1.5 | ||||
1.5-3.0 | Min3 |
Specifications of 1050 Aluminium Sheet
Thickness: 0.1mm - 6mm
Width: 30 mm - 2600 mm
Length: As customer required
Temper: O/H12/H14/H16/H18/H26
Elements | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Others | Al |
Content (max) | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | - | 0.05 | 0.03 | 0.15 | 99.5 |
Alloy | Specified | Tensile | Yield | Elongation |
Thickness(mm) | (MPa) | (MPa) | (%) | |
1050-O/ 1050-H111 | 0.2-0.5 | 65-95 | Min20 | Min20 |
0.5-1.5 | Min22 | |||
1.5-3.0 | Min26 | |||
3.0-6.0 | Min29 | |||
6.0-12.5 | Min35 | |||
12.5-80.0 | ||||
1050-H112 | 6.0-12.5 | Min75 | Min30 | Min20 |
12.5-80.0 | Min70 | Min25 | ||
1050-H12 | 0.2-0.5 | 85-125 | Min65 | Min2 |
0.5-1.5 | Min4 | |||
1.5-3.0 | Min5 | |||
3.0-6.0 | Min7 | |||
6.0-12.5 | Min9 | |||
12.5-40.0 | ||||
1050-H14 | 0.2-1.5 | 105-145 | Min85 | Min2 |
1.5-3.0 | Min4 | |||
3.0-6.0 | Min5 | |||
6.0-12.5 | Min6 | |||
12.5-25 | ||||
1050-H16 | 0.2-0.5 | 120-160 | Min100 | Min1 |
0.5-1.5 | Min2 | |||
1.5-4.0 | Min3 | |||
1050-H18 | 0.2-0.5 | Min135 | Min120 | Min1 |
0.5-1.5 | Min140 | Min2 | ||
1.5-3.0 | Min2 | |||
1050-H19 | 0.2-0.5 | Min155 | Min140 | Min1 |
0.5-1.5 | Min150 | Min130 | ||
1.5-3.0 | ||||
1050-H22 | 0.2-0.5 | 85-125 | Min55 | Min4 |
0.5-1.5 | Min5 | |||
1.5-3.0 | Min6 | |||
3.0-6.0 | Min11 | |||
6.0-12.5 | Min12 | |||
1050-H24 | 0.2-0.5 | 105-145 | Min75 | Min3 |
0.5-1.5 | Min4 | |||
1.5-3.0 | Min5 | |||
3.0-6.0 | Min8 | |||
6.0-12.5 | ||||
1050-H26 | 0.2-0.5 | 120-160 | Min90 | Min2 |
0.5-1.5 | Min3 | |||
1.5-4.0 | Min4 | |||
1050-H28 | 0.2-0.5 | Min140 | Min110 | Min2 |
0.5-1.5 | ||||
1.5-3.0 | Min3 |
